18563993100
艾思乐工贸-拷贝_03Home      艾思乐工贸-拷贝_05E-mail      艾思乐工贸-拷贝_07 Share
 
 

Product List

 
You are here: Home » Product List » PP honeycomb composite panel » FRPan » FRPan » FRPan
back

FRPan

FRPan
Unit: sq.mr
Min order: negotiable

LIKE1

OK!You like it
Product Description:


FRPan is Fiberglass pre-immerged resin sheet (FRP ) as skin panel on both sides, PP honeycomb as core. Resin adopted is Epoxy or Phenolic .They are composited from high pressure and heating by aero technology. There are about 60% consumption in FRP skin ,so composite panel is more lighter in weight meanwhile more stiffness comparing with cold lamination,in later there are only less than 30% fiberglass adoption in FRP skin.
The features of Polycore FRPan are light weight, high stiffness, sound damping, fire-retardnat, quakeproof, insulation, environmental friendly.
FRPan characteristics:

-- light weight stiffness strength
--corrosion,fungi, rot,chemical,moisture resistant
-- Sound ,vibration dampen
-- Easy assembe
-- Waterproof
-- excellent Electrical characteristics  
-- excellent Magnetics characteristics


Polycore Honeycomb sandwich panel are applicable to the apartments and external walls of building and truck body, widely Used in boat, yatch, wind turbine, sports, tank cover and so on.
FRP surface thickness from 0.5mm to 3mm made according to clients request. Most commonly application in practice is 1.5mm and 2.0mm.
Uv-treatment, anti-slip surface, gel-coat treatment, painting treatment and so on can be made according to clients request. But because our lamination is heating lamination so Gel-coat or Painting treatment only can be made after composite panel finished so such treatment cost is higher than usually supplier. Considering such cost,we strongly suggest client select original skin or black skin ,the cost is competitive.
Standard specification: 1220*2440mm
Maximal specification: 5500*12000mm.
PP honeycomb sheet thickness from 4mm to 200mm,common in application from 6mm to 40mm. So FRP PP honeycomb composite panel thickness from 7mm to above. Commonly in practice composite panel thickness from 15mm to 40mm.

 Standard size: 1220*2440mm Max size: 5500*12000mm.
 Thickness: 8mm-100mm
Application:

FRPan is widely applied in chemical barrier to provide protection for tanks, pits, pipes and grates.
FRPan is widely applied in Marine as structural material such as hull, deck, bulkhead, tank, canopies and cases;
FRPan is applied in Tooling as fabricating tooling and moulds;
FRPan is applied in truck as wall, ceiling,floor, door;
FRPan is applied in wind turbine act as blades, canopy housing and rotor hoods;
FRPan is applied in sport as leisure, film set and decorative market;
FRPan is applied in corrosion to prevent and repair of metal and concrete surfaces;
FRPan is applied in chemical barrier to provide protection for tanks, pits, pipes and grates.
FRPan is applied in door,partition,ceiling,floor ,ground structural material.in buildin

FRPan Original skin

                FRPan original skin

FRPan fire-retardant skin

                         FRPan fire-retardant skin

FRPan black skin

                 FRPan black skin

FRPan white

                  FRPan white skin


 

Technique parameter:
For example:
Both sides with 1.5mm fiberglass skin, FRPan total thickenss 20mm,weight is 5.6kgs/sq.mr

door-400k

           FRPan as door in train

IMG_7947

Related Products:

Module column

News

Fridendly Link

   艾思乐工贸-拷贝_36    艾思乐工贸-拷贝_03
  

自定义模块

Copyright 2014 Qingdao Polycore Technology Co., Ltd all rights reserved .