18563993100
艾思乐工贸-拷贝_03Home      艾思乐工贸-拷贝_05E-mail      艾思乐工贸-拷贝_07 Share
 
 

Product List

 
You are here: Home » Product List » PP honeycomb composite panel » FRPan » scaffolding panel » Scaffolding  panel
back

Scaffolding panel

Scaffolding panel
Unit: sq.mr

LIKE1

OK!You like it
Product Description:
Fiberglass pre-immerged resin sheet (FRP ) as skin panel on both sides, PP honeycomb as core. Resin adopted is Epoxy or Phenolic resin.They are composited from high pressure and heating by aero technology. There are about 60% consumption in FRP skin ,so composite panel is more lighter in weight meanwhile more stiffness comparing with cold lamination ,in later there are only less than 30% fiberglass adoption in FRP skin.

The features of Polycore FRPan are light weight, high stiffness, sound damping, fire-retardant (only skin when requirement by client), quakeproof, insulation, environmental friendly.

Anti-slip FRP as skin surface PP honeycomb as core material to be heat lamination to act as scaffolding panel with following property:
 
Water proof
Light weight with stiffness strength ratio
UV-Resistance
Stable life
Easy handling and moving 
 
Edge can be sealed or open as per requirement, hole can be made to hand take off easily
 
Anti-slip surface skin thickness from 1.0mm to 3.0mm according to request. Most common in practice is 1.5mm.
Standard size:1200*2400mm
Thickness: 10mm to above. Most common thickness in practice are 12mm,15mm,18mm,20mm,25mm.

anti-slip scaffolding panel

           moulded anti-slip Scaffolding panel

DSC04259-400k

                
 

Related Products:

Module column

News

Fridendly Link

   艾思乐工贸-拷贝_36    艾思乐工贸-拷贝_03
  

自定义模块

Copyright 2014 Qingdao Polycore Technology Co., Ltd all rights reserved .